Height Adjustable Desks

• Widths – Fixed beam range from 1200mm, 1400mm, 1600mm and 1800mm wide
• Depth – 800mm & 1600mm
• Height – Top height travels from 625mm to 1275mm based on 25mm thick top
• Levelling – 15mm leg adjustment

• Frames – Traffic Black (RAL 9017), Traffic White (RAL 9016) and Silver Grey (RAL 9006)
• Tops – 25mm MFC tops with 2mm ABS edging, see our standard mfc colours offering

• Actuators – Premium Three stage compact actuator with built in anti-collision sensors for rectangular configurations
• Speed – Maximum actuator speed 38mm/sec unloaded, travel length 650mm
• Load – Maximum double actuator load 100kgs (1000N), excludes top and frame
• Control – Basic up/down switch or 3 position memory switch
• Plug Sockets – 3 Pin Plug as standard, Non UK plug socket power cables can be supplied
• 2 parallel drive with one master motor and one slave motor at 230 volt
• Duty cycle: 10% – 2 minutes continuous use at full load, followed by 18minute pause
• Ambient Temperature: 10 to 40 Degree Celsius
• Approved in accordance with EN 60335-1 and UL 962

• Leg style – ‘H’ and ‘I’ section square leg
• Top Junction – Fixed top
• Construction – Welded sheet metal and steel box section structure, offering high stability and strength
• Leg Infill – MFC end leg infill panels
• Return Top – Retrofittable top with a single ‘I’ leg actuator set

• Cable Feed – As standard we offer two simple cable ports or as extra over we can offer a long rear scallop edge detail
• Upper Cable Tray – Full width drop down table tray which can be linked via cable chains
• Bench Lower Cable Tray – Full width mass fixed cable tray body with removable lids
• Bench Intermediate Leg – Mass intermediate vertical leg cable riser

1600mm deep 2 Person back to back bench, fixed top, fixed beam, upper and lower cable trays linked with cable chains, 25mm thick Top with 2 x cable ports, anti-collision sensors, basic up/down switch and no spine screen.

• SSB1.2P1216CP – 1200mm(w) x 1600mm(d) x 625mm-1275mm(h) bench
• SSB1.2P1416CP – 1400mm(w) x 1600mm(d) x 625mm-1275mm(h) bench
• SSB1.2P1616CP – 1600mm(w) x 1600mm(d) x 625mm-1275mm(h) bench
• SSB1.2P1816CP – 1800mm(w) x 1600mm(d) x 625mm-1275mm(h) bench

• RS – Rear scallop
• SS3MS – 3 position up/down memory switch (per top)
• SSDLS – Double leg shroud and also acts as a cable riser (each)
• SSB1.16MFCLI – 1600 MFC Leg Infill to match the desk tops (per leg)
• SSB1.166RT – 1600mm x 600mm MFC Return Top (per top)

FRAME COLOURS

TOP COLOURS